Precision Mass Standards

• • E1 Class, E2 Class, F1 Class, F2 Class Weights – 1 mg to 100kg as per OIML R- 111.
• • Weights for testing and calibration of laboratory balances and test weights.
• • Weights are mainly used in Pharmaceutical companies, Research and Development and other industries.

Weight Accessories

• Weight lifters, Tweezers, Weight Cases and Gloves

Micro and Semi micro balances

• • Balances of Class I and II as per OIML R 76 – 1mg to 220 g with resolution of 0.1 mg and 1 mg

Precision Balances

• • Balances of Class I, II, III and IV as per OIML R 76 – 1mg to 6 kg with resolution of 1 mg to 100 mg

Table Top Scales

• • Scales of Class I, II III and IV as per OIML R 76 – 6 kg to 50 kg of resolution 0.1 to 2 g

Gas flow meters

• A gas flow meter is specialized flow meter ,used to measure the volume of fuel gases such as natural gas and liquefied petroleum gases ,used in industries and laboratories available ranges from 0-2000lpm .

Ultrasonic flow meter

• An ultrasonic flow meter measure the flow of a liquid by sending ultrasonic waves across a pipe, containing the flow in the direction of the flow and in the opposite direction of the flow .pipe size from 20-6000mm

Magnetic type flow meters

• Mag flow meters provide highly accurate flow measurement for a wide variety of conductive fluid applications. range from 0.06m3h to 4000m3h

Torque sensors

• Torque sensors provide extremely accurate torque measurement over a very broad range ,of 0.1Nm to 2000 Nm

Torque wrenches and screw drivers

• A torque wrench is a tool used to apply a specific torque to a fastener such as a nut bolt or a lag screw. it is usually used in the form of a socket wrench with special internal mechanism, ranges from 0.1-2000Nm

Force sensors and load cell

• A load cell is used to determine mass, loadcell converts a force such as tension ,compression ,or torque into a signal that can be measured and standardized, ranges from 0-1000KN.

Pressure gauges and sensors

• Pressure gauges and sensors are measures the pressure of a gas or liquid with in a system .it monitors the fluid pressure in various application.

Thermo anemometer

• Thermo –anemometers are portable test equipment instrument that indicate temperature and air velocity, there are anemometers and probes .ranges from 0.2 -40m/sec..-10 to 60 ֯c

Sound level meters and calibrators

• Sound level meters and calibrators are used measure the dB levels

Glassware’s

• Laboratory glassware’s refers to a variety of equipment used in scientific work traditionally made up of glass; common lab glassware’s includes volumetric flask, beakers, cylinders, pipettes, test tubes.

Micropipette and Dispenser

• Micro pipette is a common laboratory instrument to used to measure a small amount of liquid with volume range between 0.1- 10000 µl


• Laboratory dispensers provide a simple means of storing and dispensing liquid and other materials in the laboratory, ranges from 1 – 50 ml

Vernier Caliper

• Vernier caliper is used to measure the internal and external dimensions of an object.

Micrometer

• Micrometer for making precision linear measurements of dimensions such as diameter, thickness and length of solid bodies.

Dial Gauge

• Dial gauge is used to measure small linear displacements or dimensional variations with high precision and accuracy.

Gauge Blocks

• Slip gauges or Gauge blocks are used as standards for precision length measurement. They are particularly accurate in measuring tolerance between 0.001 – 0.0005 mm

Laser Distance meter and LVDT

• • Laser distance measures with instant measurement up to 100m


• • A LVDT is used to measure linear motion which is then converted to an electrical signal.

Tachometer and Lux meter

• • Tachometer Is an instrument which measure the rotation speed of a shaft or disc. It is designed to measure RPM of a moving object.


• • Lux meter is used to measure the intensity of light.

pH Buffer Solutions

• pH is a effectively a measure of the concentrations of hydrogen ions ( i.e., Proton ) in a substance.

Conductivity Buffer solutions

• • Conductivity buffer solutions are used for factory calibration of water quality tester.


• • Regular use of these solutions is recommended to ensure specified instrument accuracy.

Multi meters

• Digital multi meters are used in a range of applications to measure multiple electrical values including current, voltage and resistance.

Clamp meter

• Clamp meter is an instrument mainly used to measure AC current and DC current

Oscilloscope

• • Oscilloscopes to measure electrical phenomenon and quickly test verify and debug their circuit designs.


• • An Oscilloscope is a laboratory instrument commonly used to display and analyze the wave form of electronic signals.

Digital Temperature Calibrator

• • Test and Calibrate temperature sensors and transmitters


• • Measures 4 to 20 mA loops and can provide loop power


• • Measures RTDs, thermo couples, Ohms and volts


• • Source / simulates thermo-couples, RTDs, volts and ohms

Thermo hygrometer

• Thermo hygrometer is used to measure air condition .it is capable of quickly and accurately delivering results on the ambient temperature and humidity of air, soil or in confined spaces.

Data logger & recorder

• Temperature data loggers are used for temperature and humidity monitoring and are above all employed in the industrial sector ,where temperature and humidity play a major role.

IR Thermo meters

• • Infrared temperature thermometer non –contact surface temperature measurements.


• • Allow temperature to be measured without contacting the object.

Incubators

• • An incubator is a device used to grow and maintain microbiological cultures or cell cultures.


• • The incubator maintains optimal temperature, humidity and other conditions such as CO2 and oxygen content of the atmosphere inside.

Vertical autoclave

• • Vertical autoclaves are top loading sterilizers used in hospitals and laboratories, made in double and triple wall construction.


• • These are widely used in hospitals, operation theater, micro biology laboratory for sterilization of various medial and cultures.

Deep freezers

• Deep freezer is a refrigerator designed to store sterilizers.

Oven

• • A oven is a tool which is used to expose materials to a hot environment.


• • Oven contains a hollow chamber and provides a means of heating the chamber in a controlled way.

Water bath

• A water bath is a piece of scientific equipment used to maintain a steady temperature for a prolonged time when incubating samples.

Vacuum pump

• A laboratory vacuum pump is an essential tool that creates and maintains vacuum condition, playing a crucial role in a variety of scientific applications.

pH meter

• • An electronic pH meter is used to obtain more accurate pH measurements.


• • A pH meter is an instrument used to measure hydrogen ion activity in solutions – in other words, this instrument measures acidity, alkalinity of a solution.

Laminar air flow cabinet

• A laminar flow cabinet that is also known as a laminar clean bench provides a sterile working environment for samples and work process.

Melting point apparatus

• It is an economical instrument for the manual determination of melting and boiling points that is suitable for laboratories with moderate requirements for sample processing in a non-regulated environment.

Tablet disintegration test apparatus

• Measure the disintegration rate of your manufactured tablets using a Tablet Disintegration Apparatus, fast, accurate results.